ENGINEERING FOR MINING & INDUSTRY
Control and power.
Field-proven expertise.
We diagnose, restore and modernise critical plant equipment. Automation and power electronics, from fault analysis to on-site testing.
Remote and on-site support
01 / OUR CAPABILITIES
Solutions for the systems
your operation depends on.
A clearly defined technical scope for troubleshooting, planned shutdowns and equipment modernisation.
01 / PLC · HMI · DCS
Automation and control
Diagnostics, programming and migration for PLC, HMI, DCS and SCADA systems. Signal integration with the control room.
02 / SINAMICS · ACS · PowerFlex
Rectifiers and drives
Maintenance, electronic troubleshooting and commissioning. Control, firing, protection and measurement checks.
03 / Austdac · Crimson
Conveyors and Austdac systems
GSW and SILBUS configuration, belt misalignment signals, alarms and trips. Red Lion HMI migration.
04 / Signals · PID control
Instrumentation and loops
Checks on sensors, transmitters, analogue signals and actuators. Troubleshooting across the measurement and control chain.
05 / PROFIBUS · PROFINET · IBA
Industrial networks and data
Communication diagnostics, fibre-optic links and IBA data acquisition to analyse plant events.
06 / Engineering · FAT / SAT
Engineering and supply
Control architecture, drawings, I/O lists and panel design. Selection of automation hardware and critical spare parts.
BRANDS AND PLATFORMS OUR TEAM WORKS WITH
02 / FIELD EXPERIENCE
Real work.
Documented outcomes.
Two projects that show our approach to equipment restoration and control integration.
QUILLA RESOURCES · QUILLA / CHAPI
Power rectifier restoration
Work on equipment that had been out of service for over ten years. Restoration of DeviceNet communication and left-side rectifier operation.
Outcome: rectifier restored, functional tests documented and critical spare parts recommended.
View technical scope
- ENERPRO firing tests and thyristor checks.
- Analogue signal and DeviceNet communication checks.
- Correction of insufficiently tightened connections.
- Critical spare parts and maintenance recommendations.
ANTAPACCAY · SERVICE THROUGH QPR
Overland conveyor support
Tail-end Red Lion HMI migration, screen updates and alarm time correction. September 2026 service through QPR Engineering & Services SAC.
Outcome: updated HMI and documented field mapping for the subsequent DCS update.
View technical scope
- Austdac field-signal reconfiguration.
- Documentation of the signal mapping to the DCS.
- Installation of an ibaPADU unit and configuration of the available optical channel.
- Replacement of the head-end cabinet power supply.
03 / HOW WE WORK
Every intervention,
from scope to handover.
We agree acceptance criteria with maintenance and automation teams before starting work.
01
Assessment
Equipment, fault history, drawings, signals and available backups.
02
Planning
Scope, shutdown window, resources and site safety requirements.
03
Execution
Measurements, logic checks, communication diagnostics and change control.
04
Testing
Signals, alarms, interlocks and equipment response. FAT / SAT as agreed.
05
Handover
Technical report, backups and maintenance recommendations.
04 / TECHNICAL TEAM
Engineering that stays
close to your operation.
We are IACP, Industrial Automation Control Process. We provide specialist automation and power electronics support for mining and industry.
We provide remote assistance, on-site services and field support according to the project scope.
Our team’s background includes mining-site assignments delivered in different roles and through engineering integrators.
ELP / TECHNICAL LEADERSHIP
Eduardo Li Paredes Alatrista
General Manager · Electronics Engineer
Field specialist in automation, drives, GMD and power rectifiers. Experience with Siemens PCS7, SINAMICS, ABB, Rockwell and IBA.
VHS / PROCESS CONTROL
Víctor Hugo Saico Quispe
Process Control Engineer
Specialist in DCS, SCADA, instrumentation and industrial networks. Experience with PCS7, WinCC, ABB 800xA, FactoryTalk, PROFIBUS and PROFINET.
BEFORE WE START
Frequently asked questions.
What information do you need to assess a service?
Equipment make and model, location, fault or improvement required, available alarms and the planned date. Drawings, trends and backups can be reviewed during the technical assessment.
Do you provide remote and on-site support?
Yes. The delivery approach depends on the requirements, available access and equipment tests. Service dates are coordinated for each assignment.
Do you work with equipment from different manufacturers?
Yes. Our team has experience with Siemens, ABB, Rockwell, Schneider Electric, Red Lion, Austdac, IBA and ENERPRO. We assess the model, equipment condition and resources before confirming scope.
What do we receive when the work is complete?
Deliverables are agreed in the proposal. They may include a technical report, evidence, program backups, updated drawings, signal matrices and test protocols.
05 / LET’S TALK
Your next challenge.
Our starting point.
Share your requirements and let’s define the technical scope of the work.
Tell us what you need.
Prepare your enquiry and choose how to send it.